Servicing During the Break-in Period

During the first 10 operating hours:

- Service the tractor daily or every 10 hours (see the service intervals in the "Lubrication and Maintenance" section).

IMPORTANT: Keep the wheel nuts tight to avoid tractor damage. Check the tightness of the wheel nuts from time to time during the first 10 hours and then periodically after that.

- Tighten the wheel nuts. (See "Wheels, Tires and Treads" section).

After the first 50 hours of operation:

- Tighten the wheel nuts. (See "Wheels, Tires and Treads" section).

- Check the tension of the alternator/fan belt and tighten the hose clamps on the air and cooling systems.

- Have the 50 hour service done.

After the first 100 hours of operation:

- Change the transmission oil and hydraulic system filters.

- Change the engine oil and oil filter.

- Change the front-wheel drive oil.

- Change the fuel filter.

AG,LT04177,143 -19-27OCT98-1/1