Checking Neutral Start System
Your John Deere tractor uses a safety system to prevent unexpected movement when starting engine. On turning key switch, engine will engage (turn over) only if the following conditions are met:
-
Gearshift lever (B) should be in "P"or in neutral.
-
PTO lever (D) should be disengaged.
 CAUTION:
If starter motor turns over engine in one of the following steps, consult a John Deere dealer to repair the starting system in neutral position.
When key switch is turned to start, the engine should not start in the following conditions:
-
Gearshift lever (B) is in gear (not in park or in neutral).
-
PTO lever (D) is engaged.
|
|
