Hitch Float

NOTE: Consult Operator's Manual for implement to check if lateral float is permissible.

Adjust implement lateral float when raising the hydraulic hitch for transport by locknut of threaded arm (D) and turning center pin to lengthen or shorten pin.

NOTE: Use a spring or a rubber band to keep arms not in use away from rear tires.

IMPORTANT: DO NOT shorten stabilizers so much that they impede the hitch arms rising up fully. If arm movement of hitch is impeded, the relief valve will open and this will overheat the hydraulic oil and damage the pump.

GB52027,0000029 -19-29NOV06-1/1