Specifications

Tractor (4x2) (4x4)
Type 350 Series John Deere
Engine:    
Model 4045D
Power kW (cv) 55 (75) 55 (75)
Maximum rpm 2400 2400
Speed range with constant power 2000 to 2400 2000 to 2400
Maximum torquea N·m (lb-ft) 265 (195) 265 (195)
Maximum torque rpm 1600 1600
Torque bulge - % 27 27
Cylinders 4 4
Power Feed Aspirated Aspirated
Power kW (cv) 48 (65) 48 (65)
Capacity - liters 4.5 4.5
Cylinder diameter (mm) 106.5 106.5
Travel (mm) 127 127
Compression Ratio 17.6:1 17.6:1
Lubricating Pressurized, with full flow filter
Cooling system Pressurized, with centrifugal pump
Fuel Tank
Capacity
68.1 68.1
Cooling system (liters) 10.8 10.8
Engine crankcase (with filter)
(liters)
12 12
hydraulic/transmission (liters) 40 40
Front axle: 4x2 and 4x4
Wheel hub (l) - 0.75
Differential housing (l) - 4
Total capacity (l) - 5.5
PTO:    
Standard and Economic 540 rpm
Actuation Mechanical
Clutch Dry disk, mechanical actuation
Actuation Mechanical
Disk diameter (mm) 280 280
Brake: Disk in oil bath, auto-adjustable
Transmission Collar Shift (non-synchronized)
Actuation Hydraulic
aIn accordance with the NBR 5484 Standard.

 

GB52027,0000063 -19-24NOV06-1/2


Hydraulic System:
Type
Open center, with constant flow
Pump Gears
Maximum flow - (l/min) 40 40
Maximum pressure (bar) 190 190
Optional SCV no. 2 2
Maximum in-valve flow - (l/min) 40 40
Maximum hitch capacity is 610 mm (24.0 in.) 1800 1800
Maximum force at hitch points (kg) 2670 2670
Category II II
Command type Mechanical - hydraulic
Steering system
Type:
Hydrostatic, with exclusive pump
Pump flow rate - (l/min) 26 26
Electrical System/ Tension - V 12 12
Alternator - A 40 40
Electric fuel shut-off Yes Yes
Battery / Capacity - (CCA) 700 700
Battery / type Sealed (unserviceable)
Shipping weight (kg) 2390 2580
Maximum weight with ballast (kg) 4500 4500
Distance between axles (mm) 2177 2177
Total length with front end weights (mm) 3850 3850
Maximum height (mm) 1440 - 2000 1160 - 1965
Rear tread (min. max) (mm) 1366 - 1770

 

GB52027,0000063 -19-24NOV06-2/2