Service During Break-In Period

Within first 10 hours of operation:

• Carry out daily service or every 10 hours. (See service intervals in this section).

  IMPORTANT: Always keep wheel bolts tightened. Check wheel bolt torque at least twice within the first ten hours of operation, after at fifty hours and periodically thereafter.

• Tighten wheel bolts (See "Treads, Wheels and Tires" section).

After First 50 Hours of Operation:

• Tighten wheel bolts (See "Treads, Wheels and Tires" section).
• Check alternator/fan belt tension and tighten all clamps of air intake and cooling system hoses.
• Retighten hydraulic hoses.
• Carry out 50 hour service.

After First 100 Hours of Operation:

• Change the transmission/hydraulic system oil filter element
• Change the engine oil and filter

* This is necessary when working in very humid or muddy conditions.

OU92976,00000F0 -19-19JUN06-1/1