Alfalfa / Barley (Feed and Malting) / Beans (Edible) / Canola (Canadian Spring)

NOTE: The following settings for various crops are for average conditions. Varying crop and field conditions may require slightly different settings.

Alfalfa		Barley (Feed & Malting)
Feeder House Drum Position	Down	Feeder House Drum Position	Down
Feeder House Conveyor Chain	26 Tooth	Feeder House Conveyor Chain	26 Tooth 1
Feed Accelerator Speed 2	High	Feed Accelerator Speed 2	High
Feed Accelerator Wear Strips	Serrated	Feed Accelerator Wear Strips	Serrated
Threshing Speed (rpm)	600—800	Threshing Speed (rpm)	600—800
Concave Clearance	0—5	Concave Clearance	5—20
Concave Type	Small Wire	Concave Type	Small Wire
Separator Grate Covers	Use as required 3	Separator Grate Covers	Use as required 3
Fan Speed (rpm)	550—700	Fan Speed (rpm)	700—850
Chaffer Settings	10—20 mm (3/8—3/4 in.)	Chaffer Settings	19—22 mm (3/4—7/8 in.)
Sieve Settings	1—3 mm (1/32—1/8 in.)	Sieve Settings	6—9 mm (1/4—11/32 in.)
Beans (Edible)		Canola (Canadian Spring)
Feeder House Drum Position	Down	Feeder House Drum Position	Down
Feeder House Conveyor Chain	22 Tooth	Feeder House Conveyor Chain	26 Tooth
Feed Accelerator Speed 2	Low 4	Feed Accelerator Speed 2	High
Feed Accelerator Wear Strips	Backswept Serrated 5	Feed Accelerator Wear Strips	Serrated
Threshing Speed (rpm)	300—350 6	Threshing Speed (rpm)	350—650
Concave Clearance	10—30	Concave Clearance	10—30 7
Concave Type	Round Bar/Large Wire	Concave Type	Small Wire
Separator Grate Covers	None	Separator Grate Covers	Use as required 3
Fan Speed (rpm)	800—1100	Fan Speed (rpm)	500—700
Chaffer Settings	14—18 mm (9/16—11/16 in.)	Chaffer Settings	10—14 mm (3/8—5/16 in.)
Sieve Settings	6—10 mm (1/4—3/8 in.)	Sieve Settings	2—4 mm (3/32—3/16 in.)