|
1 Chopper set to slow speed with knifebank out.
2 For improved grain quality,
it is recommended that separator grate spacers be installed, see Separator
Grate Spacers in Separator Section. It is okay to leave spacers installed
if harvesting in soybeans.
3 For improved
straw quality in dry crops and grain quality, use low speed.
4 For improved grain quality,
use slow down kit to 320 rpm.
5 For further
improved grain quality, use smooth wear strips. This configuration
is not recommended for small grains and rice.
6 Do not
operate above maximum concave clearance recommendation.
7 In shoe
overloading conditions in dry crops, with small wire concaves, initially
install two rows on right side and three rows on left side. Large
wire concaves, initially install three rows on right side and two
rows on left side. Adjust number and pattern as required by condition.
8 Deep tooth chaffer 14—16 mm (9/16—5/8
in.)
9 Deep tooth sieve 8—10 mm (5/16—3/8
in.)
|
OUO6075,0000185-19-20080702
|