|
CAB
|
170
|
03
|
Warning
|
Cab air temperature sensor output (cc# 766) is out of range
- greater than 4.93 VDC.
|
|
CAB
|
170
|
04
|
Warning
|
Cab air temperature sensor output (cc# 766) is out of range
- less than 0.10 VDC.
|
|
CAB
|
171
|
03
|
Warning
|
Cab inlet air temperature sensor output (cc# 763) is out of
range - greater than 4.93 VDC.
|
|
CAB
|
171
|
04
|
Warning
|
Cab inlet air temperature sensor output (cc# 763) is out of
range - less than 0.10 VDC.
|
|
CAB
|
629
|
12
|
Warning
|
Control unit CAB has reset itself due to watchdog timer.
|
|
CAB
|
677
|
03
|
Warning
|
Start relay signal (cc# 107) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
677
|
06
|
Warning
|
Start relay signal (cc# 107) is OFF when commanded ON by control
unit CAB.
|
|
CAB
|
875
|
04
|
Warning
|
HVAC low pressure switch is open.
|
|
CAB
|
1231
|
09
|
Warning
|
No Local CAN Bus messages are arriving.
|
|
CAB
|
1487
|
03
|
Warning
|
Dimmer (cc# 549) is out of range - greater than 4.5 VDC.
|
|
CAB
|
1487
|
04
|
Warning
|
Dimmer (cc# 549) is out of range - less than 0.5 VDC.
|
|
CAB
|
1491
|
03
|
Warning
|
Cab backlighting (cc# 511) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
1491
|
06
|
Warning
|
Cab backlighting (cc# 511) is OFF when commanded ON by control
unit CAB.
|
|
CAB
|
1497
|
03
|
Warning
|
Unloading auger indicator (cc# 533) is ON when commanded OFF
by control unit CAB.
|
|
CAB
|
1497
|
06
|
Warning
|
Unloading auger indicator (cc# 533) is OFF when commanded ON
by control unit CAB.
|
|
CAB
|
1503
|
03
|
Warning
|
A row of switches in the armrest switch matrix is shorted to
voltage.
|
|
CAB
|
1503
|
05
|
Warning
|
Armrest matrix connection status (cc# 928) voltage too low.
|
|
CAB
|
1503
|
11
|
Warning
|
A column of switches in the armrest switch matrix is shorted
to ground.
|
|
CAB
|
1504
|
04
|
Warning
|
Seat switch has remained closed for 8 continuous hours of operation.
|
|
CAB
|
1544
|
03
|
Warning
|
A row of switches in the multifunction control handle is shorted
to voltage.
|
|
CAB
|
1544
|
11
|
Warning
|
A column of switches in the multifunction control handle is
shorted to ground.
|
|
CAB
|
1547
|
03
|
Warning
|
Core temperature sensor output (cc# 764) is out of range - greater
than 4.93 VDC.
|
|
CAB
|
1547
|
04
|
Warning
|
Core temperature sensor output (cc# 764) is out of range - less
than 0.10 VDC.
|
|
CAB
|
1549
|
00
|
Calibration
|
Temperature door position (cc# 774) is out of range when fully
closed - greater than 4.75 VDC.
|
|
CAB
|
1549
|
01
|
Calibration
|
Temperature door position (cc# 774) is out of range when fully
open - less than 0.25 VDC.
|
|
CAB
|
1549
|
03
|
Warning
|
Temperature door position (cc# 774) is out of range - greater
than 4.5 VDC.
|
|
CAB
|
1549
|
04
|
Warning
|
Temperature door position (cc# 774) is out of range - less than
0.1 VDC.
|
|
CAB
|
1549
|
06
|
Warning
|
Temperature door actuator high (cc# 771) is OFF when commanded
ON by control unit CAB.
|
|
CAB
|
1549
|
12
|
Warning
|
Temperature door has not completed the movement requested by
the control unit CAB.
|
|
CAB
|
1549
|
13
|
Information
|
Temperature door has not been calibrated.
|
|
CAB
|
1549
|
16
|
Calibration
|
Temperature door position (cc# 774) is out of range when fully
open - greater than 1.00 VDC.
|
|
CAB
|
1549
|
18
|
Calibration
|
Temperature door position (cc# 774) is out of range when fully
closed - less than 4.00 VDC.
|
|
CAB
|
1865
|
11
|
Warning
|
One of the following conditions occurred:
●Key switch run (cc# 013) is ON when key switch accessory (cc#
011) and key switch start (cc# 104) is OFF.
●Key switch start (cc# 104) is ON when key switch run (cc# 013)
is OFF.
●Key switch start (cc# 104) is ON when key switch accessory
(cc# 011) is ON.
|
|
CAB
|
1867
|
06
|
Warning
|
Cab power module micro power (cc# 012) is OFF when commanded
ON by control unit CAB.
|
|
CAB
|
2348
|
03
|
Warning
|
Cab roof lights 3, 4 high (cc# 585) is ON when commanded OFF
by control unit CAB.
|
|
CAB
|
2348
|
05
|
Warning
|
Cab roof lights 3, 4 high (cc# 585) is open circuit.
|
|
CAB
|
2348
|
06
|
Warning
|
Cab roof lights 3, 4 high (cc# 585) is OFF when commanded ON
by control unit CAB.
|
|
CAB
|
2368
|
03
|
Warning
|
Left turn/trailer indicator (cc# 569) is ON when commanded OFF
by control unit CAB.
|
|
CAB
|
2368
|
06
|
Warning
|
Left turn/trailer indicator (cc# 569) is OFF when commanded
ON by control unit CAB.
|
|
CAB
|
2370
|
03
|
Warning
|
Right turn/combine indicator (cc# 597) is ON when commanded
OFF by control unit CAB.
|
|
CAB
|
2370
|
06
|
Warning
|
Right turn/combine indicator (cc# 597) is OFF when commanded
ON by control unit CAB.
|
|
CAB
|
2386
|
03
|
Warning
|
Front beacon light (cc# 573) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
2386
|
05
|
Warning
|
Front beacon light (cc# 573) is open circuit.
|
|
CAB
|
2386
|
06
|
Warning
|
Front beacon light (cc# 573) is OFF when commanded ON by control
unit CAB.
|
|
CAB
|
2876
|
11
|
Warning
|
Right turn signal (cc# 513) and left turn signal (cc# 514) are
ON at the same time.
|
|
CAB
|
3509
|
03
|
Warning
|
Control unit CAB sensor supply 1 (cc# 233) is out of range -
greater than 5.5 VDC.
|
|
CAB
|
3509
|
04
|
Warning
|
Control unit CAB sensor supply 1 (cc# 233) is out of range -
less than 4.5 VDC.
|
|
CAB
|
3510
|
03
|
Warning
|
Control unit CAB sensor supply 2 (cc# 243) is out of range -
greater than 5.5 VDC.
|
|
CAB
|
3510
|
04
|
Warning
|
Control unit CAB sensor supply 2 (cc# 243) is out of range -
less than 4.5 VDC.
|
|
CAB
|
3597
|
06
|
Information
|
CAB protected power (cc# 552) is out of range - less than 4.0
VDC.
|
|
CAB
|
523319
|
03
|
Stop
|
CAB switched power (cc# 932) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
523319
|
06
|
Warning
|
CAB switched power (cc# 932) is OFF when commanded ON by control
unit CAB.
|
|
CAB
|
523490
|
03
|
Warning
|
High idle indicator (cc# 529) has voltage present when control
unit CAB has turned low side driver ON.
|
|
CAB
|
523490
|
06
|
Warning
|
High idle indicator (cc# 529) has no voltage present when control
unit CAB has turned low side driver OFF.
|
|
CAB
|
523491
|
03
|
Warning
|
Mid idle indicator (cc# 528) has voltage present when control
unit CAB has turned low side driver ON.
|
|
CAB
|
523491
|
06
|
Warning
|
Mid idle indicator (cc# 528) has no voltage present when control
unit CAB has turned low side driver OFF.
|
|
CAB
|
523492
|
03
|
Warning
|
Low idle indicator (cc# 527) has voltage present when control
unit CAB has turned low side driver ON.
|
|
CAB
|
523492
|
06
|
Warning
|
Low idle indicator (cc# 527) has no voltage present when control
unit CAB has turned low side driver OFF.
|
|
CAB
|
523622
|
04
|
Information
|
Cab power module power 5 (cc# 062) less than 10.5 VDC at the
CPM input.
|
|
CAB
|
523623
|
03
|
Warning
|
Switched auxiliary power 1 (cc# 071) is ON when commanded OFF
by control unit CAB.
|
|
CAB
|
523623
|
06
|
Warning
|
Switched auxiliary power 1 (cc# 071) is OFF when commanded ON
by control unit CAB.
|
|
CAB
|
523624
|
03
|
Warning
|
Cab roof lights 3 ,4 (cc# 584) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
523624
|
05
|
Warning
|
Cab roof lights 3, 4 (cc# 584) is open circuit.
|
|
CAB
|
523624
|
06
|
Warning
|
Cab roof lights 3, 4 (cc# 584) is OFF when commanded ON by control
unit CAB.
|
|
CAB
|
523625
|
00
|
Calibration
|
Fan speed adjust (cc# 074) is out of range at maximum - greater
than 4.25 VDC.
|
|
CAB
|
523625
|
01
|
Calibration
|
Fan speed adjust (cc# 074) is out of range at minimum - less
than 0.25 VDC.
|
|
CAB
|
523625
|
03
|
Warning
|
Fan speed adjust (cc# 074) is out of range - greater than 4.50
VDC.
|
|
CAB
|
523625
|
04
|
Warning
|
Fan speed adjust (cc# 074) is out of range - less than 0.50
VDC.
|
|
CAB
|
523625
|
13
|
Information
|
Fan speed adjust (cc# 074) has not been calibrated.
|
|
CAB
|
523625
|
16
|
Calibration
|
Fan speed adjust (cc# 074) is out of range at minimum - greater
than 1.00 VDC.
|
|
CAB
|
523625
|
18
|
Calibration
|
Fan speed adjust (cc# 074) is out of range at maximum - less
than 4.00 VDC.
|
|
CAB
|
523626
|
14
|
Warning
|
Right rear red light (cc# 517) output driver fault.
|
|
CAB
|
523627
|
14
|
Warning
|
Left rear red light (cc# 518) output driver fault.
|
|
CAB
|
523628
|
14
|
Warning
|
Front beacon light (cc# 573) output driver fault.
|
|
CAB
|
523629
|
03
|
Warning
|
Left amber lights (cc# 516) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
523629
|
05
|
Warning
|
Left amber lights (cc# 516) is open circuit.
|
|
CAB
|
523629
|
06
|
Warning
|
Left amber lights (cc# 516) is OFF when commanded ON by control
unit CAB.
|
|
CAB
|
523630
|
03
|
Warning
|
Cab roof lights 1, 6 (cc# 581) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
523630
|
05
|
Warning
|
Cab roof lights 1, 6 (cc# 581) is open circuit.
|
|
CAB
|
523630
|
06
|
Warning
|
Cab roof lights 1, 6 (cc# 581) is OFF when commanded ON by control
unit CAB.
|
|
CAB
|
523631
|
03
|
Warning
|
Recirculation fan power (cc# 082) is ON when commanded OFF by
control unit CAB.
|
|
CAB
|
523631
|
05
|
Warning
|
Recirculation fan power (cc# 082) is open circuit.
|
|
CAB
|
523631
|
06
|
Warning
|
Recirculation fan power (cc# 082) is OFF when commanded ON by
control unit CAB.
|
|
CAB
|
523632
|
03
|
Warning
|
Cab roof lights 2, 5 (cc# 583) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
523632
|
05
|
Warning
|
Cab roof lights 2, 5 (cc# 583) is open circuit.
|
|
CAB
|
523632
|
06
|
Warning
|
Cab roof lights 2, 5 (cc# 583) is OFF when commanded ON by control
unit CAB.
|
|
CAB
|
523633
|
03
|
Warning
|
Right amber lights (cc# 515) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
523633
|
05
|
Warning
|
Right amber lights (cc# 515) is open circuit.
|
|
CAB
|
523633
|
06
|
Warning
|
Right amber lights (cc# 515) is OFF when commanded ON by control
unit CAB.
|
|
CAB
|
523634
|
03
|
Warning
|
Hazard lights indicator (cc# 555) is ON when commanded OFF by
control unit CAB.
|
|
CAB
|
523634
|
06
|
Warning
|
Hazard lights indicator (cc# 555) is OFF when commanded ON by
control unit CAB.
|
|
CAB
|
523635
|
03
|
Warning
|
Feed rate enabled indicator (cc# 541) has voltage present when
control unit CAB has turned low side driver ON.
|
|
CAB
|
523635
|
06
|
Warning
|
Feed rate enabled indicator (cc# 541) has no voltage present
when control unit CAB has turned low side driver OFF.
|
|
CAB
|
523636
|
03
|
Warning
|
4WD low indicator (cc# 536) has voltage present when control
unit CAB has turned low side driver ON.
|
|
CAB
|
523636
|
06
|
Warning
|
4WD low indicator (cc# 536) has no voltage present when control
unit CAB has turned low side driver OFF.
|
|
CAB
|
523637
|
03
|
Warning
|
4WD high indicator (cc# 543) has voltage present when control
unit CAB has turned low side driver ON.
|
|
CAB
|
523637
|
06
|
Warning
|
4WD high indicator (cc# 543) has no voltage present when control
unit CAB has turned low side driver OFF.
|
|
CAB
|
523638
|
03
|
Warning
|
Road/field indicator (cc# 534) has voltage present when control
unit CAB has turned low side driver ON.
|
|
CAB
|
523638
|
06
|
Warning
|
Road/field indicator (cc# 534) has no voltage present when control
unit CAB has turned low side driver OFF.
|
|
CAB
|
523639
|
03
|
Warning
|
Right rear red light (cc# 517) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
523639
|
05
|
Warning
|
Right rear red light (cc# 517) is open circuit.
|
|
CAB
|
523639
|
06
|
Warning
|
Right rear red light (cc# 517) is OFF when commanded ON by control
unit CAB.
|
|
CAB
|
523640
|
03
|
Warning
|
Left rear red light (cc# 518) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
523640
|
05
|
Warning
|
Left rear red light (cc# 518) is open circuit.
|
|
CAB
|
523640
|
06
|
Warning
|
Left rear red light (cc# 518) is OFF when commanded ON by control
unit CAB.
|
|
CAB
|
523641
|
00
|
Calibration
|
Temperature adjust (cc# 075) is out of range at maximum - greater
than 4.25 VDC.
|
|
CAB
|
523641
|
01
|
Calibration
|
Temperature adjust (cc# 075) is out of range at minimum - less
than 0.25 VDC.
|
|
CAB
|
523641
|
03
|
Warning
|
Temperature adjust (cc# 075) is out of range - greater than
4.50 VDC.
|
|
CAB
|
523641
|
04
|
Warning
|
Temperature adjust (cc# 075) is out of range - less than 0.50
VDC.
|
|
CAB
|
523641
|
13
|
Information
|
Temperature adjust (cc# 075) has not been calibrated.
|
|
CAB
|
523641
|
16
|
Calibration
|
Temperature adjust (cc# 075) is out of range at minimum - greater
than 1.00 VDC.
|
|
CAB
|
523641
|
18
|
Calibration
|
Temperature adjust (cc# 075) is out of range at maximum - less
than 4.00 VDC.
|
|
CAB
|
523642
|
03
|
Warning
|
CAN Bus message from control unit RCU that HVAC high pressure
switch is open.
|
|
CAB
|
523643
|
03
|
Warning
|
Handle position 1 (cc# 935) is out of range - greater than 4.5
VDC.
|
|
CAB
|
523643
|
04
|
Warning
|
Handle position 1 (cc# 935) is out of range - less than 0.5
VDC.
|
|
CAB
|
523644
|
11
|
Warning
|
One of the following conditions occurred:
●Separator engage ON switch (cc# 933) and separator engage OFF
switch (cc# 931) are ON at the same time.
●Separator engage ON switch (cc# 933) and separator engage OFF
switch (cc# 931) are OFF at the same time.
|
|
CAB
|
523645
|
11
|
Warning
|
One of the following conditions occurred:
●Header engage switch (cc# 988) is ON when both header forward
switch (cc# 987) and header reverse switch (cc# 989) are OFF.
●Header engage switch (cc# 988) is OFF when either header forward
switch (cc# 987) or header reverse switch (cc# 989) is ON.
●Header engage switch (cc# 988) is ON when both header forward
switch (cc# 987) and header reverse switch (cc# 989) are ON.
|
|
CAB
|
523646
|
03
|
Warning
|
Outlet air temperature sensor output (cc# 761) is out of range
- greater than 4.93 VDC.
|
|
CAB
|
523646
|
04
|
Warning
|
Outlet air temperature sensor output (cc# 761) is out of range
- less than 0.10 VDC.
|
|
CAB
|
523647
|
03
|
Warning
|
Temperature door actuator high (cc# 771) and/or Temperature
door actuator low (cc# 773) is ON when commanded OFF by control unit
CAB.
|
|
CAB
|
523647
|
06
|
Warning
|
Temperature door actuator low (cc# 773) is OFF when commanded
ON by control unit CAB.
|
|
CAB
|
523648
|
04
|
Information
|
Cab power module power 4 (cc# 052) less than 10.5 VDC at input.
|
|
CAB
|
523649
|
04
|
Information
|
Cab power module power 3 (cc# 042) less than 10.5 VDC at input.
|
|
CAB
|
523650
|
04
|
Information
|
Cab power module power 2 (cc# 032) less than 10.5 VDC at input.
|
|
CAB
|
523653
|
04
|
Information
|
Cab power module power 1 (cc# 022) less than 10.5 VDC at input.
|
|
CAB
|
523665
|
04
|
Information
|
CCU/CDU/GS2/Cab Power 1 (cc# 072) at connector X555 is less
than 4.0 VDC.
|
|
CAB
|
523666
|
04
|
Information
|
CCU/CDU/GS2/Cab Power 1 (cc# 072) at connector X553 is less
than 4.0 VDC.
|
|
CAB
|
523667
|
03
|
Warning
|
Chassis tilt engaged indicator (cc# 535) has voltage present
when control unit CAB has turned low side driver ON.
|
|
CAB
|
523667
|
06
|
Warning
|
Chassis tilt engaged indicator (cc# 535) has no voltage present
when control unit CAB has turned low side driver OFF.
|
|
CAB
|
523668
|
03
|
Warning
|
Function active indicator (cc# 537) has voltage present when
control unit CAB has turned low side driver ON.
|
|
CAB
|
523668
|
06
|
Warning
|
Function active indicator (cc# 537) has no voltage present when
control unit CAB has turned low side driver OFF.
|
|
CAB
|
523672
|
03
|
Warning
|
Pressurizer fan motor (cc# 921) is ON when commanded OFF by
control unit CAB.
|
|
CAB
|
523672
|
05
|
Warning
|
Pressurizer fan motor (cc# 921) is open circuit.
|
|
CAB
|
523672
|
06
|
Warning
|
Pressurizer fan motor (cc# 921) is OFF when commanded ON by
control unit CAB.
|
|
CAB
|
523673
|
05
|
Information
|
Chassis ground (cc# 010) not connected to ground.
|
|
CAB
|
523746
|
03
|
Warning
|
System wakeup power (cc# 006) is ON when commanded OFF by control
unit CAB.
|
|
CAB
|
523746
|
04
|
Warning
|
System wakeup power (cc# 006) is out of range - less than 0.10
VDC.
|
|
CAB
|
523746
|
06
|
Warning
|
System wakeup power (cc# 006) is OFF when commanded ON by control
unit CAB.
|