Moisture Sensor (If Equipped)

SymptomProblemSolution

Moisture is too high.

Green plant sap or weed seed buildup on moisture sensor plates.

Clean moisture sensor plates.

Moisture is consistently high or low.

Moisture correction needs adjustment.

Change moisture correction.

Moisture does not change

Obstructed sensor. Actuator stopped.

Inspect moisture sensor and clean as needed.

Moisture reading is inaccurate.

Incorrect crop selected.

Select correct crop.
 

Moisture sensor out of calibration.

Change moisture calibration.

Moisture always zero.

Obstruction in sensor.

Inspect moisture sensor and clean as needed.

OUO6075,0000B6C-19-20070409