CLIMATRAK Fresh Air Filter and Recirculating Filter—Cleaning

NOTE: If system is not cooling check evaporator filter. Clean this filter only if other service does not provide enough cooling. The evaporator filter can be inspected from outside the cab after removing the fresh air filter. If it looks clean, do not remove and clean it. See your John Deere dealer.

Clean filter by one of the following methods:

• Tap gently on flat surface, dirty side down. Do not tap on a tire.
• Blow compressed air through filter in opposite direction of arrows on filter.
• Soak 15 minutes in warm (not hot) water with R36757 John Deere Dry Filter Element Cleaner or its equal (non-sudsing detergent).
• Rinse until clean with water from hose. Do not use a high pressure washer.
• Shake extra water from filter and allow element to dry. Do not use compressed air to dry filter. It may rupture it.