| Error Codes |
Error Message |
Solution |
| 200E |
System not calibrated |
|
| 201E |
Header height not calibrated |
|
| 202E |
Header float pressure not calibrated |
|
| 203E |
Header height sensors not available |
28 |
| 209E |
Slow raise valve engage circuit fault |
25 |
| 210E |
Slow lower valve engage circuit fault |
25 |
| 211E |
Fast raise valve engage circuit fault |
25 |
| 212E |
Fast lower valve engage circuit fault |
25 |
| 213E |
Tilt valve engage circuit fault, left-hand side |
26 |
| 214E |
Tilt valve engage circuit fault, right-hand side |
26 |
| 215E |
Flex pressure diverter valve circuit fault |
24 |
| 216E |
Accumulator shutoff valve circuit fault |
24 |
| 218E |
Sensor power supply fault |
6 |
| 220E |
Height control setting fault |
10 |
| 221E |
Float control setting fault |
11 |
| 224E |
Feeder house angle sensor fault |
13 |
| 225E |
Left-hand cutting height sensor fault |
14 |
| 226E |
Right-hand cutting height sensor fault (Sensor out of range) |
15 |
| 227E |
Cylinder pressure sensor fault |
16 |
| 232E |
Header raise/lower switch fault |
8 |
| 233E |
Manual tilt switch fault |
8 |
| 234E |
Flex pressure switch fault. |
9 |
| 235E |
Reel raise/lower switch fault |
8 |
| 236E |
Reel forward switch fault |
8 |
| 240E |
Header cutting height sensor fault |
21 |
| 241E |
Reel raise/lower position sensor fault (not available) |
19 |
| 242E |
Reel forward position sensor fault (not available) |
20 |
| 243E |
Reel fast raise valve engage circuit fault |
26 |
| 244E |
Reel fast lower valve engage circuit fault |
26 |
| 245E |
Reel forward position circuit fault |
26 |
| 246E |
Reel aft position circuit fault |
26 |
| 247E |
Reel raise/lower setpoint position not reached (not available) |
|
| 248E |
Reel fore/aft setpoint position not reached (not available) |
|