Specification

Engine:
Manufacturer John Deere
Model 6068HCQ82 Engine 6068HCQ81 Engine
Power 139 kW (186 hp) @ 2300 rpm and 133 kW (178 hp) @ 2400 rpm in accordance with the ECE R24 standard (net power).
152 kW (204 hp) @ 2300 rpm and 148 kW (198 hp) @ 2400 rpm in accordance with ISO14936 (gross power).		 181 kW (243 hp) @ 2300 rpm and 166 kW (223 hp) @ 2400 rpm in accordance with the ECE R24 standard (net power).
196 kW (262 hp) @ 2300 rpm and 183 kW (245 hp) @ 2400 rpm in accordance with ISO14936 (gross power).
Type Six-cylinder, in line, valve-in-head, diesel turbocharged
Cylinder bore 106.5 mm (4.2 in.)
Cylinder travel 127 mm (5 in.)
Displacement 6.8 L (1.8 US gal)
Firing order 1-5-3-6-2-4
Electrical System:
Type 12 Volts, negative ground, 120 A alternator and 150 A battery
Hydraulic system*:
Type Quadruple Pump, electro-hydraulic valves
Pressure 210-150-140-195 bar (3045-2175-2030-2827.5 psi)
Flow Rate to Header 48.6 L/min (12.83 US gal/min)-210 bar
Flow Rate for Operation 16.8 L/min (4.43 US gal/min)-150 bar
Flow Rate to Steering 24.6 L/min (6.49 US gal/min)-140 bar
Flow Rate to Reel 33.6 L/min (8.87 US gal/min)-195 bar and 140 bar
Total Flow Rate 123.6 L/min (32.65 US gal/min)-695 bar
Steering System:
Type Hydrostatic with telescopic and inclinable post
Capacities
Grain tank 1470 CWS/WTS:
6000 L (1585 US gal)		 1570 CWS/WTS:
6000 L (1585 US gal) standard or 6800 L (1796 US gal) adjustable extension
Unloading auger (unloading flow rate) 3300 L/min (871.77 US gal/min)
Engine cooling system 55 L (14.5 US gal)
Engine crankcase 32.5 L (8.6 US gal)
Final drive 4.8 L (1.27 US gal)
Threshing cylinder drive reduction gear (grease) 0.8 kg (1.76 lb)
Brake system (with reservoir) 1 L (0.264 US gal)
Gearbox 9.6 L (2.5 US gal)
Fuel tank 470 L (124.16 US gal)
Windshield washer reservoir 2.8 L (0.74 US gal)
Hydraulic system reservoir 29 L (7.66 US gal)

 

AS60558,000123A -19-05FEB09-1/2

Hydrostatic system reservoir 24 L (6.34 US gal)
* Engine at maximum rpm without load.  

 

  1470 CWS/WTS 1570 CWS/WTS
Transmission:
Type 3 Speeds with lock
Cab Noise Level:
EEC Directive No. 86/188. Measurement method in accordance with ISO 5131, with cab closed.
79 dB (Average value)
Weight without Headera
Approximate 10,000 kg (22046.23 lbs) 11,400 kg (25,132.7 lbs)
Feeder House
Number of chains 3 4
Number of cross members 38 - "U"-Profile 57 - "U"-Profile
Length 1.8 m (5.9 ft) 1.8 m (5.9 ft)
Lateral tilt +/- 4 degrees - option
Vertical tilt +/- 9 degrees - standard
Reverser 11,931.2 W (16 hp)
Threshing System:
Diameter 610 mm (2 ft)
Cylinder width 1.3 m (4.26 ft)
Number of bars 08
Beater bore 380 mm (14.96 in.)
Concave width 1.3 m (4.26 ft)
Concave area 0.77 m2 (1193.50 sq in.) 0.93 m2 (1,441.5 sq in.)
Separator System:
Number of steps on straw walker 05
Straw walker length 3.715 m (146.25 in.)
Fan diameter 580 mm (22.83 in.)
Fan adjustment Electrically from cab
Quantity of straw walkers 05 06
Straw walker separating area 4.83 m2 (51.98 sq ft) 5.79 m2 (62.32 sq ft)
Upper cleaning shoe area (including extension) 2.45 m2 (26.37 sq ft) 2.95 m2 (31.75 sq ft)
Grain sieve area 1.88 m2 (20.23 sq ft) 2.38 m2 (25.61 sq ft)
Total cleaning area 4.60 m2 (49.51 sq ft) 5.60 m2 (60.27 sq ft)
aAll weights stated in this manual are approximate combine values with all accessories installed.

 

AS60558,000123A -19-05FEB09-2/2