Cleaning the Grain Tank and Removal of Obstructions

Avoid serious injury or death from entanglement in the grain tank cross augers. For functional reasons the cross augers cannot be completely covered. Do not enter the grain tank when the engine is running. Before entering the tank to clean out residual grain, always shut off the engine, set parking brake and remove the key

If the grain bridges over and fails to flow into the cross augers, shut off the engine, remove the key and, positioned from the engine compartment door use a rod, broom or shovel to break up the bridge and restore grain flow.

HX,STSSA,M -19-22JUL99-1/1