Track Shoe Inspection Torque

T8130000218
T8130000218-UN-21JAN13

T8130002948
T8130002948-UN-18NOV13

A - Cap Screws (4 used on each shoe)

Inspect for loose cap screws (A) using this procedure:

  1. Mark bolt head and the adjacent surface of the track shoe.

  2. Loosen bolt approximately 1/8 of a turn (45°).

  3. Tighten bolt until the two marks align.

  4. Read the torque at this point. If the torque is below specification, loosen all four bolts and retighten by the torque-turn method. If the torque is higher, it is acceptable.

    ItemMeasurementSpecification
    Cap ScrewsTorque407 N·m (300 lb.-ft.)

OU90500,00003D9-19-20150402