Fire Extinguisher Operation

H90363
H90363-UN-05DEC07

Your machine is equipped with a general-purpose fire extinguisher and a pressurized water fire extinguisher. Extinguishers must be checked daily when entering or exiting the cab and when working around machine to ensure that it is in working condition. Fire extinguishers must be replaced or professionally serviced after any usage.


Fire Extinguisher Recommendations:

    General-Purpose Fire Extinguisher:

  • Use extinguisher for grease, oil, electrical, and chemical fires.

Pressurized Water Fire Extinguisher:

  • Use extinguisher for crop material buildup or crop debris fires.

Use of Fire Extinguisher:

The diagram shows the recommended method to extinguish a fire. Always aim towards base of fire.

The following are basic steps for the use of a fire extinguisher:

  1. Remove fire extinguisher from bracket and carry to area of fire.
  2. Approach area of fire with wind to your back.
  3. Pull safety pin from top of extinguisher.
  4. Hold extinguisher upright by handles and aim hose at base of flames.
  5. Squeeze handles to discharge fire extinguisher.
  6. Move nozzle back and forth, covering flames with a cloud of powder.

Inspection Checklist:

At least once per month, inspect fire extinguisher and ensure the following:

  1. Is fire extinguisher positioned in designated location on landing?
  2. Are there any obstructions to proper access or visibility?
  3. Are operating instructions on nameplate legible and facing outward?
  4. Are safety seals broken or missing?
  5. Is extinguisher full (checking by gauge and by lifting extinguisher)?
  6. Is there any physical damage, corrosion, leakage, or a clogged nozzle?

IMPORTANT: When inspection of fire extinguisher reveals a deficiency, extinguisher must be serviced or replaced.

WM05597,0000EDB-19-20140408