Start Up Procedure After Extractor Blade Replacement

  1. CAUTION:

    TS677
    TS677-UN-21SEP89

    Avoid serious injury or death. Stay clear of rotating extractor fan. Always wear appropriate protective clothing and safety equipment. Verify that all personnel have evacuated extractor operating area before start-up.

    Remove all tools and loose items from extractor area.


  2. Start engine and operate extractor fan at 100—200 rpm. Check for fan vibration.

  3. Slowly increase rpm until full speed is achieved. Check for fan vibration. If vibration is observed, shut OFF engine immediately, remove key, and wait for harvesting functions to stop completely before investigating problem.

  4. If no vibration is observed, proceed with primary extractor calibration procedure. See Calibration Procedures section.

WM05597,0000FCE-19-20150209