Remove Machine From Storage

1. Charge batteries completely. Specific gravity equals 1.260.

2. Reinstall/reconnect batteries. Turn battery disconnect switch to ON position.

3. Check the following fluid levels. Add fluids as necessary.

   • Radiator coolant
   • Engine oil
   • Hydraulic oil
   • Pump drive gear case oil
   • Fuel
   • Chopper gear case oil
   • Base cutter gear case oil
   
   

4. Check drive belt tension.

5. Clean inside of air filter housing and install new elements.

6. Clean inside of cab air filter housings and install new elements.

7. Check tires for inflation and condition.

8. Inspect fire extinguisher by following maintenance instructions on fire extinguisher label. Recharge or replace as necessary.

9. Inspect hoses, harnesses, and clamps for damage and wear.

10. Review machine operators manual.