Service Interval Chart—Every 250 Hours

Service

Every 250 Hours

Change final drives oil

♦

Rear axle service

♦

Lubricate crop divider scrolls and outer scrolls (4 fittings)

♦

Lubricate elevator chain sprocket bearing (2 fittings)

♦

Lubricate base cutter (2 fittings)

♦

Lubricate chopper bearings (2 fittings)

♦

Lubricate chopper curtain agitator (if equipped) (1 fitting)

♦

Lubricate sill roller bearing (if equipped) (1 fitting)

♦

Lubricate feed roller bearings (9 fittings)

♦

Change engine oil and filter1

♦

Check engine belt and tensioner

♦

Check tires for damage and proper inflation

♦

Check fuel tank breather

♦

1 Fuel sulfur levels effect engine oil change frequency, when using standard oil. See Engine Oil and Filter Service Intervals—Tier 2 and Stage II Engines or Engine Oil, Filter Service Intervals—Tier 3 and Stage IIIA—PowerTech™ Plus Engines, or Diesel Engine Oil Service Interval for Operation at High Altitude in Fuels, Lubricants, and Coolant section for further information.

WM05597,00012C5-19-20150421