Hydraulic Oil and Gas Under Pressure

NOTE:

CQ290284
CQ290284-UN-09MAY14

Decal is located on stone trap door and is only on ProDrive™ transmission machines.

Avoid serious injury from contact with hydraulic oil and gas under pressure.

Before removing hydraulic components, disassembling or charging accumulators:

  1. Relieve system hydraulic pressure. Refer to operator's manual and repair manual for system information.
  2. Stop engine and remove key.

Use only dry nitrogen for recharging accumulator. See your local John Deere dealer.

ProDrive is a trademark of Deere & Company

LR35023,00001F5-19-20180308