Discharge Beater Wear Strips—Replacing (S680 and S690)

CAUTION: Shut OFF engine, set park brake and remove key.

NOTE: Wear strips can be reversed for additional wear.

Discharge beater wings and wear strips can be replaced without removing the discharge beater. Replace discharge beater wings in sets of two and opposite of each other to maintain proper balance.

H85626-UN-27MAR06

H85627-UN-27MAR06

Discharge Beater Wings and Wear Strips (Standard)

A - Round Head Cap Screws

B - Discharge Beater Wear Strip

C - Cap Screws

D - Discharge Beater Wings

NOTE: If discharge beater is removed from machine, or has been serviced, tighten clamp bolts before securing wings.

Remove round head bolts (A) and replace discharge beater wear strips (B) as required. Tighten round head bolts to specification.

Item	Measurement	Specification
Discharge Beater Wear Strip Round Head Bolts	Torque	70 N·m (52 lb.-ft.)

Remove cap screws (C) and replace discharge beater wings (D) as required. Tighten cap screws to specification.

Item	Measurement	Specification
Discharge Beater Wing Cap Screws	Torque	70 N·m (52 lb.-ft.)