Adjusting Rotor Height-754

NOTE: Outer left-hand side illustrated.

The rotor height can be adjusted to four different positions:

OUO6059,00004B2 -19-08MAY02-1/5

1. Maximum working angle (first cut; normal or dense crops). Handle (A) should point rearward and lever (B) should face downward.


A-Handle
B-Lever

E36782

OUO6059,00004B2 -19-08MAY02-2/5

2. Second and third cuts (medium density and light crops). Handle (A) should point rearward and lever (B) should face upward.


A-Handle
B-Lever

E36783

OUO6059,00004B2 -19-08MAY02-3/5

NOTE: The following angle positions should only be used for light short-stemmed crops and when working on extremely flat terrain.

3. Angle can be reduced more by pointing lever (A) toward the front and lever (B) downward.


A-Handle
B-Lever

E36784

OUO6059,00004B2 -19-08MAY02-4/5

4. Minimum working angle is obtained by pointing lever (A) toward front and lever (B) upward.


A-Handle
B-Lever

E36785

OUO6059,00004B2 -19-08MAY02-5/5