OME126849: 447 and 547 Round Balers, Block File: AG_OUO6077_1079_19_08AUG00.htm

447 and 547 Round Baler Specifications¹

	447	547
BALER DIMENSIONS
Length: Gate Closed	3439 mm (135.4 in.)	3439 mm (135.4 in.)
Length: Gate Open	4420 mm (174 in.)	4420 mm (174 in.)
Height: Gate Closed	2337 mm (92 in.)	2337 mm (92 in.)
Height: Gate Open	2896 mm (114 in.)	2896 mm (114 in.)
Width: Regular or MEGATOOTH™ Pickup	2451 mm (96.5 in.)	2847 mm (112.1 in.)
Width: MegaWide Pickup	2516 mm (99 in.)	2819 mm (111 in.)
BALER WEIGHT	1524 kg (3360 lb)	1780 kg (3925 lb)

BALE

Diameter	900-1295 mm (35-51 in.)	900-1295 mm (35-51 in.)
Width	1171 mm (46.1 in.)	1565 mm (61.6 in.)
Typical Weight^a	340 kg (750 lb)	454 kg (1000 lb)
Maximum Weight	567 kg (1250 lb)	567 kg (1250 lb)

REGULAR PICKUP

Width: Inside	1166 mm (45.9 in.)	1560 mm (61.4 in.)
Width: On Flare	1410 mm (55.5 in.)	1803 mm (71 in.)
Width: Between Outer Teeth	1123 mm (44.2 in.)	1519 mm (59.8 in.)
Drive	Roller chain with V-belt	Roller chain with V-belt
Toothbars	4	4
Number of Teeth	36 (72 tines)	48 (96 tines)
Tooth Spacing	66 mm (2.6 in.)	66 mm (2.6 in.)
Stripper Diameter	254 mm (10 in.)	254 mm (10 in.)

MEGATOOTH™ PICKUP

Width: Inside	1166 mm (45.9 in.)	1560 mm (61.4 in.)
Width: On Flare	1410 mm (55.5 in.)	1803 mm (71 in.)
Width: Between Outer Teeth	1123 mm (44.2 in.)	1519 mm (59.8 in.)
Drive	Roller chains with slip clutch	Roller chains with slip clutch
Toothbars	4	4
Number of Center Teeth	28 (56 tines)	40 (80 tines)
Number of Outside (Mega) Teeth	16 (16 tines)	16 (16 tines)
Tooth Spacing	66 mm (2.6 in.)	66 mm (2.6 in.)
Stripper Diameter	254 mm (10 in.)	254 mm (10 in.)
^aDepending on crop conditions.

¹(Specifications and design subject to change without notice.)

AG,OUO6077,1079 -19-08AUG00-1/3

	447	547
MegaWide PICKUP
Width: Inside	1560 mm (61.4 in.)	1864 mm (73.4 in.)
Width: On Flare	1803 mm (71 in.)	2210 mm (87 in.)
Width: Between Outer Teeth	1519 mm (59.8 in.)	1519 mm (59.8 in.)
Drive	Roller chains with slip clutch	Roller chains with slip clutch
Toothbars	4	4 Left-Hand and 4 Right-Hand
Number of Center Teeth	40 (80 tines)	56 (112 tines)
Number of Outside (Mega) Teeth	16 (16 tines)	8 (8 tines)
Tooth Spacing	66 mm (2.6 in.)	66 mm (2.6 in.)
Stripper Diameter	254 mm (10 in.)	254 mm (10 in.)

FORMING BELTS

Number	6	8
Width	178 mm (7 in.)	178 mm (7 in.)
Type	3-Ply combination nylon polyester, diamond tread, friction surface, with wire-type splices	3-Ply combination nylon polyester, diamond tread, friction surface, with wire-type splices
Length	(2) 10230 mm (402-3/4 in.) (4) 10420 mm (410-1/4 in.)	(4) 10230 mm (402-3/4 in.) (4) 10420 mm (410-1/4 in.)

BALE WRAP

Type	Single Twine Wrap (standard) Double Twine Wrap (optional)	Single Twine Wrap (standard) Double Twine Wrap (optional)
Control	Manual	Manual
Actuator Type	Hydraulic (standard) Electric (optional)	Hydraulic (standard) Electric (optional)
Twine Spacing	Operator controlled w/visual indicators. Adjustable via flow valve if equipped with hydraulic twine wrap	Operator controlled w/visual indicators. Adjustable via flow valve if equipped with hydraulic twine wrap

MECHANICAL BALE FORMING INDICATORS (On Baler)

Bale size	Pointer/scale	Pointer/scale
Twine Arm Position	Pointer/scale	Pointer/scale

ELECTRICAL BALE FORMING INDICATORS

Bale Shape	Slide bar	Slide bar
Bale Size Alert	Buzzer; set point adjustable to desired bale size. Indicates near, full, and oversize bale	Buzzer; set point adjustable to desired bale size. Indicates near, full, and oversize bale
GEAR CASE OIL CAPACITY (On Baler)	1.2 L (1.25 U.S. qt)	1.2 L (1.25 U.S. qt)

TIRE SIZE

Standard	9.5L-14, 6 ply rating	9.5L-14, 6 ply rating
Optional (Hi-Flotation)	31 x 13.5-15, 8 ply rating	31 x 13.5-15, 8 ply rating

POWER TRAIN

PTO Shaft Speed	540 rpm	540 rpm
Drive Protection	Shear bolt or optional slip clutch	Shear bolt or optional slip clutch

AG,OUO6077,1079 -19-08AUG00-2/3

	447	547
TRACTOR RECOMMENDED
Minimum Power	33.6 kW (45 hp)	33.6 kW (45 hp)
Hydraulics (Recommended):
Control Valve	Two double-acting selective control valves. If equipped with hydraulic wrap or hydraulic pickup lift.	Two double-acting selective control valves. If equipped with hydraulic wrap or hydraulic pickup lift.
Flow (Minimum)	22.7-24.6 L/min (6-6.5 gpm)	22.7-24.6 L/min (6-6.5 gpm)

AG,OUO6077,1079 -19-08AUG00-3/3