Manually Releasing Net Wrap Brake

IMPORTANT: It is recommended to disengage and engage net wrap brake DAILY, before starting baler operation. This helps to slightly reposition the feed rolls and avoid wrappage due to cling of net material on the rubber roll surface.

1. Disengage PTO, shut off tractor engine and disconnect monitor-controller power plug from tractor convenience outlet.

2. Open net wrap cover.

3. Move lever (A) out and back to disengage roller brake pad (B).

4. To re-engage net wrap drive, return lever (A) to engaged position and check that pad (B) contacts belt pulley.

5. Close net wrap cover.

A-Lever
B-Brake Pad

AG,OUO6059,188 -19-23JUN00-1/1