BALETRAK PLUS® Monitor-Controller Setup Values and Initial Settings
BALE DIAMETER
Readout Display Range
22-75 in. (0.56-1.9 m)
Diameter Adjustment Range
32-72 in. (0.81-1.83 m)
Diameter Initial Settinga
66 in. (1.68 m)
Near Full Size Range
0.5-10.0 in. (0.01-0.25 m)
Near Full Size Initial Settinga
4.5 in. (0.11 m)
Bale Shape Sensitivity Range
1 (slowest)-5 (fastest)
Bale Shape Sensitivity Initial Settinga
3 (medium)
TWINE WRAP
Spacing Range
2-10 in. (0.05-0.25 m)
Spacing Initial Settinga
4 in. (0.10 m)
Number of End Wraps Range
Left-Hand End
0-10 Wraps
Right-hand End
0.6-10 Wraps
Number of End Wraps Initial Settinga
2 Wraps
Left-Hand End Wrap Distance Range
3-10 in. (0.08-0.25 m)
Right-Hand End Wrap Distance Range
467 and 467S
3-10 in. (0.08-0.25 m)
567
2-10 in. (0.05-0.25 m)
End Wrap Distance Initial Setting (Right and Left-Hand)a
4 in. (0.11 m)
Re-Extension Wrap Distance Range
5-20 in. (0.13-0.51 m)
Cinch Wrap Initial Setting (From Left-Hand End)
10 in. (0.25 m)
NET WRAP
Number of Wraps
1.2-5
Number of Wraps Initial Settinga
2
Time Delay Range (From Full-Size Bale Alert to Start of Net Wrap Cycle)
0-8 Seconds
Time Delay Initial Settinga
2 Seconds
VARIABLE CORE DIAMETER
Diameter Adjustment Range
24-67 in. (0.61-1.7 m)
Diameter Initial Settinga
36 in. (0.92 m)
aSettings revert to these values when monitor-controller is reset. (See BALETRAK PLUS® MONITOR-CONTROLLER-RESET TO INITIAL SETTINGS [CH 01] in this section.)
BALETRAK PLUS is a registered trademark of Deere & Company