Install Fire Extinguisher-457 and 557

A 9.5 L (2-1/2 gal) pressurized-water fire extinguisher can be mounted in the holes that are provided on the baler. (See your John Deere dealer.)

AG,OUMX005,1391 -19-20MAR00-1/3

NOTE: If bracket holes do not align with holes in baler, drill new holes in the bracket, NOT the baler.

1. Install bracket on left-hand front panel. Fasten with four M8 x 25 cap screws (A), 9 x 28 x 3 mm washers, and nuts.


A-Cap Screws, M8 x 25

E40536

AG,OUMX005,1391 -19-20MAR00-2/3

2. Fill, pressurize and test fire extinguisher. If baler is subjected to cold weather, a nonflammable antifreeze solution should be used to prevent damage to extinguisher.

3. Fasten fire extinguisher to bracket.

E40537

AG,OUMX005,1391 -19-20MAR00-3/3