Install Fire Extinguisher-457S

A 9.5 L (2-1/2 gal) pressurized-water fire extinguisher can be mounted in the holes that are provided on the baler. (See your John Deere dealer.)

AG,OUMX005,1392 -19-20MAR00-1/3

NOTE: If bracket holes do not align with holes in baler, drill new holes in the bracket, NOT the baler.

1. Install two M10 x 35 cap screws (A) through front of baler. Install flange nut on each cap screw (nuts are used as spacers.) Tighten nuts.

2. Install bracket (B) on baler. Install flange nuts on cap screws (A).

3. Install flange nuts (C).


A-Cap Screws, M10 x 35
B-Bracket
C-Flange Nuts

E41649

AG,OUMX005,1392 -19-20MAR00-2/3

4. Fill, pressurize, and test fire extinguisher. If baler is subjected to cold weather, a nonflammable antifreeze solution should be used to prevent damage to extinguisher.

5. Fasten fire extinguisher to bracket.

E41650

AG,OUMX005,1392 -19-20MAR00-3/3