Adjusting Twine Indicator Retaining Strap

1. Loosen cap screw (A).

2. Position retaining strap (B) as follows:

  • Right-hand side of baler; Eight O'clock position
  • Left-hand side of baler; Four O'clock position

3. Adjust dimension (C) between strap and twine indicator wheel according to specifications.

Specification

Strap-to-Twine Indicator Wheel -Distance 0.4-0.8 mm (0.016-0.031 in.)

4. Tighten cap screw (A).

5. Twine indicator wheel must spin freely after adjustment.

E39735

Right-Hand Side Shown


A-Cap Screw
B-Retaining Strap
C-Distance

AG,OUMX005,1529 -19-03AUG00-1/1