Route Hydraulic Hoses and Wiring Harness

1. Raise tongue and remove jackstand (D) from storage location (C). Place in the vertical position and secure with pin and quick-lock pin.

2. Cut shipping wire from PTO shield (B).

3. Raise PTO shield and remove tie strap (A) from hoses and wiring harness. Route hoses and wiring harness along right-hand side of tongue.


A-Tie Strap
B-PTO Shield
C-Jackstand Storage Location
D-Jackstand

E41816

AG,OUO1078,22 -19-11OCT99-1/1