BaleTrak™ Pro Monitor-Controller System Introduction

The Bale-Trak ™ Pro system provides the operator with accurate and useful information to help him make the best bales possible, and to automatically operate the wrapping system (twine or optional net wrap) and optional variable core system.

In addition, the system allows the operator to conveniently tailor these functions to suit his specific requirements by adjusting certain controller settings as desired. In most cases, these adjustments are made from the tractor seat without the inconvenience or delays required on previous models. The operator can manually extend or retract the twine arms, or initiate a wrap cycle, by pushing a single button.

The system is preset, functional, and ready to use when you receive your baler. It is recommended to operate the baler briefly with the factory settings, to familiarize yourself before you adjust or reset them. The BaleTrak™ Pro system will "remember" the settings loaded at the time the power is shut off.

If necessary, the BaleTrak™ Pro system can be used to troubleshoot Baler malfunctions, and has convenient channels available to ensure proper baler switch and sensor adjustments.

The BaleTrak™ Pro system monitors and/or controls the following baling operations and conditions:

  • Bale Diameter
  • Bale Shape
  • Twine Wrapping
  • Net Wrapping (if equipped)
  • Bale Eject
  • Bale Count
  • Gate Closed
  • Variable Core Diameter (if equipped)
  • Alarms
    • Gate Open
    • Oversize Bale
    • Low Tractor Voltage
    E52435


    A-Monitor-Controller

Bale Trakis a trademark of Deere & Company

AG,OUO6017,1617 -19-14APR03-1/2

    • Net Wrap Misfed or Miscut (if equipped)

The BaleTrak™ Pro system uses "diagnostic channels" for testing switches and "setup channels" for adjusting bale shape sensitivity.

AG,OUO6017,1617 -19-14APR03-2/2