Using Heavy-Duty Tractor Drawbar
IMPORTANT:
Some tractors may not be equipped with a drawbar strong enough for use with the baler. If so, replace drawbar with a heavy-duty drawbar.
Inspect your tractor drawbar frequently for cracking or bending. Replace it immediately if any damage is observed.
Hitch conversion kit is recommended if baler is being operated with a tractor that has a 61 mm (2 in.) thick drawbar. Conversion kit part No. AE57344 is available through John Deere parts.
See your John Deere dealer for information on special heavy-duty drawbars that are available for many John Deere tractor models.
|