Adjusting Gathering Wheel Height (If Equipped)

IMPORTANT: Gathering wheels should never be in heavy contact with the ground or damage to gathering wheels may occur.

NOTE: Gathering wheels are not available for the MegaWide pickup.

1. Remove chain (A) from chain anchor support and lower wheel (B) to ground.

2. Raise chain (A) one link and install back in chain anchor support. Wheel should be approximately 25 mm (1 in.) from the ground.

If less than one chain link is needed for an adjustment, twist the chain and install back in chain anchor support.

NOTE: This is an initial setting; final adjustment will be determined by field conditions.

E40021


A-Chain
B-Gathering Wheel

OUMX005,0000032 -19-27SEP00-1/1