Adjusting Variable (Soft) Core Switch (If Equipped)

1. Close gate and lower tension arm.

OUMX005,000007A -19-02OCT00-1/2

2. Make sure switch roller (B) is on raised part of the numbered cam (C).

3. Clearance (A) between switch arm and switch body should be within specifications.

Specification

Switch Arm-to-Switch Body -Clearance 1-2 mm (0.039-0.079 in.)

4. Loosen switch mounting screws and adjust switch until specified clearance is obtained. Tighten screws.

E39183


A-Clearance
B-Switch Roller
C-Cam

OUMX005,000007A -19-02OCT00-2/2