Install Bale Counter (Optional) (BALEWATCH™ System)

1. Install counter (A) with four No. 5 x 5/8 in. machine screws, lock washers, and nuts.

NOTE: Short spring link is not used in this application.

2. Hook long spring link (B) in eye of cotter pin (C).

3. Attach spring (D) to spring link (B) and counter arm (E). Close spring ends.

NOTE: Belt tension arm must be in down position.

4. Adjust counter arm (E) so slack is just removed from spring (D).


A-Counter
B-Spring Link
C-Cotter Pin
D-Spring
E-Counter Arm

E40217
E40556

OUMX005,000008C -19-02OCT00-1/1