Installing Compressor Rack Assembly

1. Install compressor rack (A) in left-hand bracket (B).


A-Compressor Rack
B-Left-Hand Bracket

E48306

MegaWide Pickup Shown

OUO6059,0000018 -19-05SEP00-1/2

2. Lift right-hand end and slide compressor rack (A) into bracket (B).

3. Install cap screw and lock nut (C). Install cotter pin (D) into right-hand end of compressor rack tube.

NOTE: Make sure compressor rods do not interfere with twine arms. Adjust individual rods, as necessary, or adjust compressor rack assembly for clearance.

4. Adjust to desired operating height. Tighten lock nut (C). (See ADJUSTING COMPRESSOR RACK ASSEMBLY in this section.)

E40061

MEGATOOTH Pickup Shown


A-Compressor Rack
B-Bracket
C-Lock Nut
D-Cotter Pin

OUO6059,0000018 -19-05SEP00-2/2