|
Clutch does not slip
|
Distance between rear plate and pressure plate is less than specifications.
|
Adjust clutch. (See ADJUSTING MAIN DRIVE SLIP CLUTCH [IF EQUIPPED] in Service-Baler section.)
|
|
|
Seized or rusted.
|
Slip the clutch. (See SLIPPING THE MAIN DRIVE SLIP CLUTCH [IF EQUIPPED] in Service-Baler section.)
|
|
|
Warped pressure plate and/or clutch disk.
|
Replace pressure plate and/or clutch disk. (See your John Deere dealer.)
|
|
Clutch slips excessively
|
Distance between rear plate and pressure plate is more than 7.1 mm (0.280 in.).
|
Adjust clutch. (See ADJUSTING MAIN DRIVE SLIP CLUTCH [IF EQUIPPED] in Service-Baler section.)
|
|
|
Disk spring weak from overheating.
|
Replace disk spring.
|
|
|
Worn friction disk.
|
Replace (See your John Deere dealer.)
|