Checking Gate Lock Valve Interlock Lever Adjustment

IMPORTANT: Before operating baler, make sure gate lock lever is in the UNLOCKED position. Failure to unlock valve will damage baler.

Interlock lever (B) prevents gate lock valve lever (A) from being moved into the "locked" position with gate closed.

2. Rotate interlock lever (B) until it contacts the gate.

3. Try to move gate lock lever (A) to the locked position.

• If lever cannot be moved to locked position, no adjustment is needed.
• If lever can be moved to locked position;

  a. Loosen gate lock valve assembly mounting cap screws (C) and move gate lock valve assembly toward the gate. Distance between gate and end of interlock lever should be within specifications. Gate-to-Interlock Lever
  Gap 15-20 mm (0.591-0.787 in.)

  
  b. Tighten cap screws and repeat Step 2.
  

A-Gate Lock Lever
B-Interlock Lever
C-Cap Screws

OUO6059,0000060 -19-06SEP00-1/1