| BaleTrak™ Monitor-Controller |
| Near-Full Bale |
Indicator displayed/audible alarm |
| Full Bale |
Indicator displayed/audible alarm |
| Auto-Wrap |
Indicator displayed/audible alarm |
| Oversize Bale Protection |
STOP/oversize indicator/audible alarm |
| Gate Closed |
Indicator displayed |
| Nighttime Operation |
Display area backlight |
| Continuous Twine Application |
Indicator displayed |
| Net Wrap Application |
Indicator displayed |
| Auto Wrap Cycle |
Activates when bale reaches preset size |
| Gate Latched |
Indicator displayed |
| Bale Full Size-Wrapping Started |
Indicator displayed |
| Wrapping Completed-Eject Bale |
Indicator displayed |
| Bale Shape |
Vertical bars displayed: 24 each column |
| Wrap of Undersize Bale |
Touch wrap key |
| Bale Size Indicator |
Digital display |
| Set Bale Size |
Touch bale size key/touch Plus or minus key |
| Set Twine Spacing/Net Wraps |
Touch key/touch Plus or minus key |
| Set Number of End Wraps, Right or Left |
Touch key/touch Plus or minus key |
| Set End Wrap Location, Right or Left |
Touch key/touch Plus or minus key |
| Set Re-extension and Cinch Wrap |
Hold key/touch Plus or minus key |
| Out of Net Wrap |
STOP indicator displayed/audible alarm |
| Surface Wrap Cutoff |
Indicator displayed |
| Selection of Twine or Net Wrap |
Touch and hold twine/net key |
| Control of Variable Core |
Diameter setting and on/off key |
| On Board Diagnostics |
Digital LCD |
| Bale Counters |
Resetable and total |
| Manual Actuator Movement with Electronic By-pass |
Separate switch in harness |
| Low Voltage Indicator |
Indicator displayed |