Annually

Baler Wheel Bearings and Gathering Wheel Bearings (If Equipped)

Remove the wheels; then clean, repack, and adjust bearings. Use John Deere EP Moly or an equivalent SAE multipurpose type grease, or wheel bearing grease.

E39740

Baler Wheel Shown

AG,OUO6059,262 -19-17JUL00-1/5

Slip Clutch-MEGATOOTH ™ or MegaWide Pickup

IMPORTANT: Do not over-lubricate slip clutch grease fittings or clutches may not slip. Apply only two shots per grease fitting. Use only a hand grease gun to lubricate slip clutch fittings.

Fittings needs to be greased once a year or if slippage occurs.

Lubrication fittings are designed to release excess pressure.

  • Keep lubrication fittings clear.
E39741

MEGATOOTH is a trademark of Deere & Company

AG,OUO6059,262 -19-17JUL00-2/5

Pickup Idler Arm
E44438

Regular and MEGATOOTH™ (Right-Hand Side)

E48762

MegaWide (Left-Hand Side)

AG,OUO6059,262 -19-17JUL00-3/5

Pickup Lift Bellcrank Pivot
E48765

MegaWide Shown

AG,OUO6059,262 -19-17JUL00-4/5

CoverEdge™ Net Wrap Actuator (If Equipped)

Lubricate rod end and base end actuator and link mounting pins with SAE 30 or heavier oil.

E48194

AG,OUO6059,262 -19-17JUL00-5/5