As Required

Break-Away Latch

1. Loosen lock nut (B) to release spring washer tension.

2. Pivot hitch frame to expose sliding surfaces of break-away components.

3. Apply John Deere EP Moly Grease, or equivalent SAE multipurpose grease, to sliding surfaces.

4. Pivot hitch to original position and tighten lock nut (B) until length (A) is according to specifications.


Break-Away Latch -Length (A) 95 mm (3-3/4 in.)


B-Lock Nut

AG,OUMX005,321 -19-12JUL04-1/1