Adjusting Tractor Wheels

NOTE: Adjust tractor wheels toward upper end of specifications to improve:

  • Bale shape by crowding ends of pickup

  • Ability to pick up crop

Adjust front wheels to provide an inside tire-to-tire dimension of 1372-1524 mm (54-60 in.).

E21602

OUO6077,0001920 -19-05JAN05-1/2

Adjust rear tractor wheels to provide an outside tire dimension of 2591-2743 mm (102-108 in.)

IMPORTANT: Do not make extremely short turns or cause the baler to jackknife while backing, as damage may occur to the PTO driveline.

NOTE: If tread setting is too narrow, operator will not be able to make properly shaped bales without driving on windrow. This may result in bales with soft ends and loose twine. (See INTERPRETING BALE SHAPE INDICATORS and WEAVING IN THE WINDROW in Operating the Baler section.)

E21603

OUO6077,0001920 -19-05JAN05-2/2