457 Standard Round Baler Specifications1
| BALER DIMENSIONS |
| Length: Gate Closed |
3612 mm (142.2 in.) |
| Length: Gate Open |
4542 mm (178.8 in.) |
| Height: Gate Closed |
2597 mm (102.2 in.) |
| Height: Gate Open |
3251 mm (128 in.) |
| Width |
2451 mm (96.5 in.) |
| BALER WEIGHT |
1701 kg (3750 lb) |
| BALE |
| Diameter |
889-1524 mm (35-60 in.) |
| Width |
1171 mm (46.1 in.) |
| Typical Weighta |
455 kg (1000 lb) |
| REGULAR PICKUP |
| Width: Inside |
1166 mm (45.9 in.) |
| Width: On Flare |
1410 mm (55.5 in.) |
| Width: Between Outer Teeth |
1123 mm (44.2 in.) |
| Drive |
Roller chain with V-belt |
| Toothbars |
4 |
| Number of Teeth |
36 (72 tines) |
| Tooth Spacing |
66 mm (2.6 in.) |
| Stripper Diameter |
254 mm (10 in.) |
| FORMING BELTS |
| Number |
6 |
| Width |
178 mm (7 in.) |
| Type |
3-Ply combination nylon polyester,
diamond tread, friction surface |
| Length |
(2) 11709 mm (461 in.)
(4) 11849 mm (466.5 in.) |
| BALE WRAP |
| Type |
Double twine wrap |
| Control |
Manual |
| Actuator Type |
Hydraulic |
| Twine Spacing |
Operator controlled w/visual indicators. |
| MECHANICAL BALE FORMING INDICATORS (On Baler) |
| Bale Size |
Pointer/scale |
| Twine Arm Position |
Pointer/scale |
| Bale Shape |
Slide Bar |
| aDepending on crop conditions. |
|
|
OUO6077,000193F -19-14JAN05-1/2
|
| ELECTRICAL BALE FORMING INDICATORS |
| Bale Size Alert |
Buzzer; set point adjustable to desired bale size.
Indicates near, full and oversize bale |
| GEAR CASE OIL CAPACITY (On Baler) |
1.2 L (1.25 U.S. qt) |
| TIRE SIZE |
11L-14, 8 ply rating |
| POWER TRAIN |
| PTO Shaft Speed |
540 rpm |
| Drive Protection |
Shear bolt |
| TRACTOR RECOMMENDED |
| Minimum Power |
41 kW (55 hp) |
| Hydraulics |
Two double-acting selective control valves. |
|
|
OUO6077,000193F -19-14JAN05-2/2
|
|