Adjusting Drawbar

NOTE: Shield removed for illustration.

1. Adjust tractor drawbar to specification (A) from end of PTO shaft to center of hole in drawbar.

Specification

Center Hole in Drawbar-to-PTO Shaft -Distance (A) 35.6 cm (14 in.)

2. Adjust drawbar clearances to within specifications.

Specification

Drawbar-to-PTO Shaft -Clearance (B) 15.2-30.5 cm (6-12 in.)
Drawbar-to-Ground -Clearance (C) 33.0-50.8 cm (13-20 in.)

3. Position drawbar to align hitch pin hole with centerline of tractor power takeoff shaft.

E19279


A-Distance
B-Clearance
C-Clearance
D-Equal Angle Hitch

OUO6038,000003C -19-11SEP00-1/1