Loading Twine Box (328)1. Put four balls of twine in twine box. Pull twine from top end of ball.IMPORTANT: Ensure twine for right-hand side goes through FRONT of tension plate (B). Twine for left-hand side goes through REAR of tension plate (B). 2. Thread twine from the center of one left-hand and one right-hand ball through its respective guide (A), then through tension plate (B). 3. Tie outside end of first ball to inside end of second ball. Use a modified square knot with sisal twine and a sheet bend knot with plastic twine. 4. Trim loose ends of twine as close to knot as possible. 5. Always have a new ball of twine in the left-hand compartment. |
|
OUO6038,000003F -19-26OCT06-1/1 |