|
Bale too light.
|
Tension too loose.
|
Adjust tension. (See ADJUSTING TWINE TENSION in Operating the Baler section.)
|
|
Bale too heavy.
|
Tension too tight.
|
Adjust tension. (See ADJUSTING TWINE TENSION in Operating the Baler section.)
|
|
Bale too heavy with crank screwed out.
|
Hay too wet or too green.
|
Let hay dry or cure before baling.
|
|
Bale too long.
|
Not enough material in top of bale and/or measuring wheel not contacting crop correctly.
|
Increase bale tension. (See ADJUSTING TWINE TENSION in Operating the Baler section and ADJUSTING BALE MEASURING CONTROL in Service section.)
|
|
Bale too short.
|
Measuring arm not dropping home.
|
Adjust bale measuring control. (See ADJUSTING BALE MEASURING CONTROL in Service section.)
|