Adjusting Drawbar

NOTE: Shield removed for illustration.

1. Adjust tractor drawbar to measure 14 in. (356 mm) (A) from end of PTO shaft to center of hole in drawbar.

2. Adjust drawbar within 6 to 12 in. (152 to 305 mm) clearance (B) and 13 to 20 in. (330 to 508 mm) (C) clearance to ground.

3. Position drawbar to align hitch pin hole with centerline of tractor power takeoff shaft.

E19279


A-14 in. (356 mm)
B-6 to 12 in. (152 to 305 mm)
C-13 to 20 in. (330 to 508 mm)
D-Equal Angle Hitch

OUO6078,0005278 -19-08JUN06-1/1