OME131731: 348 Square Baler, Block File: OUO6078_000531C_19

IMPORTANT: Check twister hook adjustment after replacing bevel gears.

Bevel gears must be adjusted to mesh properly and have even heel alignment with pinions on twister shafts.

OUO6078,000531C -19-09JUN06-1/2

1. Add or remove washers (A) on gear shaft to adjust gears to right or left.

2. Add washers between pinions and twister frames to raise pinions.

A-Washers

OUO6078,000531C -19-09JUN06-2/2