Adjusting Knotter Drive Brake

1. Disconnect lower end of lift link from needle frame (A).

2. Attach twine to needle frame and pull rearward at a 90 degree angle to needle frame.

IMPORTANT: Brake retaining bolts (C) must not contact brake pressure plate (D).

3. Loosen or tighten brake adjusting nuts (B) until 269 N (60 lb) pull will move needle lift arm.

E24765


A-Needle Frame
B-Brake Adjusting Nuts
C-Brake Retaining Bolts
D-Brake Pressure Plate

OUO6085,0000667 -19-01NOV06-1/1