348 Square Baler Specifications1
|
|
| BALER DIMENSIONS AND WEIGHT |
| MODEL |
348 |
| Width |
|
| Transport |
27.43 cm (108 in.) |
| Length |
|
| With Bale Chute and 3-Joint PTO |
576.6 cm |
| Less Tongue and Bale Chute |
3.50 m (11 ft 2 in.) |
| Height (Maximum) |
1.70 m (5 ft 7 in.) |
| Weight |
|
| Minimum (Twine) |
1412 kg (3110 lb) |
| Maximum (Twine) |
1507 kg (3320 lb) |
| Minimum (Wire) |
1430 kg (3140 lb) |
| Maximum (Wire) |
1507 kg (3350 lb) |
| Wire Size |
14-1/2 gauge |
| Cross Section |
36 x 46 cm (14 x 18 in.) |
| Length |
Adjustable 31-127 cm (12-50 in.) |
| Width |
|
| Inside |
163 cm (64 in.) |
| On Flare |
188 cm (74 in.) |
| Between Outer Teeth |
152 cm (60 in.) |
| Cylinder Diameter |
30.5 cm (12 in.) |
| Number of Teeth |
156 |
| Number of Tooth Bars |
6 |
| Space Between Teeth |
6.0 cm (2.4 in.) |
| Diameter |
40.7 cm (16 in.) |
| Length |
155.0 cm (61 in.) |
| Dimensions |
1864.5 cm2 (289 sq in.) |
| Stroke |
76.2 cm (30 in.) |
| Normal Speed |
93 strokes per minute (maximum) |
|
|
OUO6085,0000684 -19-17NOV06-1/2
|
| |
348 |
| Flywheel Diameter |
68.6 cm (27 in.) |
| PTO Shaft Speed |
ASAE-SAE Standard 540 rpm (maximum) |
| Driveline Size |
Category 4
(Category 5 Optional) |
| Gears |
Steel Cut Enclosed |
| Capacity |
3.8 L (4 U.S. qt) |
| Right-Hand |
| Size |
26 x 12.00-12 4-ply Rating |
| Inflation Pressure |
138 kPa (1.4 bar) (20 psi) |
| Left-Hand |
| Size |
11L-14 6-ply rating |
| Inflation |
207 kPa (2.1 bar) (30 psi) |
| Pickup Gauge Wheel (Optional) |
| Size |
16 x 6.50-8 |
| Inflation |
138 kPa (1.4 bar) (20 psi) |
| Minimum Power |
30kW (40 hp)a |
| aUse a larger tractor if wagons are pulled. |
|
|
OUO6085,0000684 -19-17NOV06-2/2
|
|