Adjusting Gauge Shoes

NOTE: Adjusting upper link will affect cutting height in all gauge shoe positions.

Change cutting height by adjusting gauge shoes.

1. Raise machine completely.

2. Shut off tractor.

causym CAUTION: Engage BOTH cylinder locks when working on machine. Failure to do so can result in personal injury or machine damage.

NOTE: If platform is to be in the raised position for an hour or more, lower platform onto cylinder locks. This prevents the transfer of oil from the master cylinder to the slave cylinder causing hydraulic lock and preventing platform from being raised.

3. Engage cylinder lock (A) at each lift cylinder.

E37161

EX,820J,J -19-03JAN95-1/2

4. Pull lever (A) and move to desired setting.

5. Repeat on opposite side.

E37155

EX,820J,J -19-03JAN95-2/2