Adjusting Platform Float

NOTE: Tongue must be in operating position to correctly adjust platform float.

Use lightest float setting that allows platform to remain firmly on the ground without bouncing. The platform should follow uneven ground without gouging or scraping. An initial starting point should be 378 N (85 lbs) at each end of platform.

To adjust, remove crank (A) from storage position. Turn handle clockwise to decrease ground pressure; turn handle counterclockwise to increase ground pressure.

EX,820J,M -19-20JAN95-1/2

Return crank to storage position (B).

Check platform float after adjusting gauge shoes or guard angle.

EX,820J,M -19-20JAN95-2/2